Qyb40-60L Pneumatic Oil Pump

Qyb40-60L Pneumatic Oil Pump

CZPT oil pump
1 Overview
     CZPT oil pump is a higher-force pump that converts air pressure into hydraulic electrical power. It is controlled by oil and pneumatic elements and is primarily employed in techniques that use hydraulic oil as the medium. When the electrical pump fails, the electricity is reduce off or the energy is not permitted to start the pneumatic oil pump, so it is an auxiliary pump on the BOP management gadget.

Title Design Nominal
Force MPa nominal
Diameter mm liquid-gasoline ratio gasoline supply
Stress MPa operate
Force Mpa Theoretical displacement ml/flush Net excess weight kg Volume cm³
CZPT oil pump QYB40-60L 40 twenty five 60: 1  0.sixty five~.8 21 60 36 ninety eight*twenty*twenty

2. Structure and functioning principle
As proven in the figure, the pneumatic pump is primarily composed of the adhering to areas:
Connecting rod, shuttle, connecting block, shell, piston, short pipe, cylinder, cylinder help, piston connecting rod, cylinder connecting rod, V-formed packing, V-shaped fabric seal ring, plunger assembly, seal, Pressure ring, verify valve entire body, oil cylinder, steel ball B1, B2, and so on.
Compressed air enters the housing cavity from the air inlet, enters the decrease cavity of the cylinder through the upper air pipe and brief pipe of the housing, pushing the piston upward, and the air in the higher cavity of the cylinder passes through the reduce air pipe of the housing and is discharged from the exhaust port. The piston drives the plunger assembly upward by way of the cylinder connecting rod, urgent the higher stress oil in the upper cavity of the cylinder out of the oil discharge port, and at the identical time the metal ball B2 moves upward, and the hydraulic oil enters the reduced cavity of the cylinder from the oil suction port. When the piston moves up to the leading of the cylinder, the shuttle is moved up just previous the midpoint of the reversing mechanism by pushing the connecting rod, and the shuttle is quickly pushed upwards underneath the press of the ejector pin spring to push the connecting block to make the upper air pipe and the exhaust The air is connected. At this time, the air enters the upper cavity of the cylinder by means of the reduce air pipe of the housing, pushing the piston down, and the air in the reduce cavity of the cylinder passes by means of the limited pipe and the higher air pipe of the housing is discharged from the exhaust port. The piston drives the plunger assembly down by way of the cylinder connecting rod. The steel ball B2 moves down to shut the suction port, whilst the metal ball B1 moves up. The hydraulic oil in the reduced cavity of the cylinder enters the upper cavity of the cylinder by way of the check valve human body. When the piston moves down to the base of the cylinder, the shuttle is moved down just earlier the midpoint of the reversing mechanism by driving the connecting rod. Under the drive of the ejector pin spring, the shuttle is speedily pushed downwards, driving the connecting block, and decreasing the casing. The air pipe communicates with the exhaust port, and the air enters the lower cavity of the cylinder. In this reciprocating change of air flow, even if the piston and the piston connecting rod are connected to reciprocate up and down, at the very same time, the plunger assembly is also pushed to reciprocate up and down to realize the oil absorption and oil discharge approach of the oil pump.
The top of the cylinder of the pneumatic oil pump is geared up with a sealing packing. When the oil leaks, the packing cap can be adjusted, but it should not be also limited, or else it will speed up the use of the packing and the connecting rod of the cylinder.
three. Characteristics and recommendations
       The operating qualities of the pneumatic oil pump are: intermittent oil suction, steady oil discharge, steady begin, and load start.
       The air-operated oil pump has a cylinder and cylinder cavity surface area area ratio of 60:1, so the theoretical ratio of consumption stress to oil discharge strain is 1:sixty. When the air resource stress is .fifty three~.8Mpa, the theoretical oil force can achieve 32 ~48Mpa.
       The oil discharge and air consumption of the pneumatic oil pump are not constant, but modify with the load pressure. When the load stress is low, the pump strokes improve, and the oil discharge and air intake boost when the load stress is large, the pump strokes decrease, and the oil discharge and air use lessen.

Firm Information
UPET OILFIELD EQUIPMENTS CO.,LTD is one particular of the most nicely-recognized suppliers for the oilfield equipments in China, was proven in 2000, and now has developed up to a star organization which is not massive but really strong in this subject with our persistant effort phase by step in the past years.Our products refer to the total areas of oilfields, from a really little spare portion to a very massive comprehensive rig program. Our major products are: pump spare areas, mud pumps&offers, DC/AC CZPT, sound management equipments, energy models, truck-mounted rigs, workover rigs, land rigs, drilling pipes and drilling equipment and so forth. All of our goods are manufactured according to the API Standard, and we are licensed to use API monogram.
Our goods have been exported to fifteen countries& locations around the entire world, eighty% of our exsisting buyers have carried out the business with us by much more than 5 instances, no 1-off buyer. We will continue to broaden our assortment, and acquire a lot more customers’ have confidence in with our better and much better overall performance.
We welcome the earn-win cooperation connection with the partners from any places in the entire world, each and every customer is our god and helper. Warmly welcome you to come to China and pay a visit to us!
With us, you will save funds, time, difficulties, and most essential position is that you can sleep much better.

 

Qyb40-60L Pneumatic Oil Pump

Tags:

Recent Posts