Downhole Motor for Directional Drilling
>>Product Description
CZPT Parameter
Spec. | Suggested Gap Size | Input Circulation Price | Pressure Loss | Bit Speed | Doing work Torque | Hold off CZPT Torque | Output Power | Drilling Fat | Max Drilling Bodyweight | Joint Thread | Size | ||
Device | mm | In | L/S | Mpa | r/min | N.m | N.m | KW | KN | KN | In | In | mm |
5LZ57×7. | 83-121 | 31/four-43/four | one.five-3.5 | three.two | 185-430 | two hundred | 350 | 4.three-ten.1 | five | ten | 11/2REG | eleven/2REG | 2822 |
5LZ73×7. | eighty three-121 | 31/four-forty three/4 | 2-four | three.2 | 80-one hundred sixty | 615 | 1077 | five.8-11.five | twelve | 25 | 23/8REG | 23/8REG | 3423 |
9LZ89×7. | a hundred and five-143 | 41/eight-fifty five/8 | three-eight | 3.2 | 147-392 | 504 | 882 | 8.sixty four-23 | 20 | thirty | 27/8REG | 27/8REG | 2911 |
5LZ95×7. | 114-one hundred fifty | forty one/eight-fifty seven/eight | 5-12 | 3.2 | a hundred and forty-320 | 710 | 1240 | ten.five-twenty five | 21 | forty | 27/8REG | 27/8REG | 3920 |
5LZ120×7. | 152-200 | 6-77/eight | eight-sixteen | 3.two | 80-one hundred eighty | 1850 | 3200 | 23-47 | sixty four | 106 | 31/2REG | 31/2REG | 5039 |
5LZ165×7.0V | 245-244 | 81/eight-95/eight | eighteen-thirty | three.2 | 111-167 | 4440 | 7770 | 57.6-86.four | eighty | one hundred sixty | forty one/2REG | 41/2REG | 7408 |
5LZ165.5×7.0V | 215-244 | eighty one/8-ninety five/eight | 18-thirty | 4. | 120-a hundred and eighty | 5135 | 8987 | seventy two-108 | 90 | 180 | forty one/2REG | forty one/2REG | 7748 |
5LZ172×7.0V | 215-244 | 81/eight-95/8 | eighteen-30 | 4. | a hundred and twenty-one hundred eighty | 5135 | 8987 | seventy two-108 | ninety | 180 | 41/2REG | forty one/2REG | 7391 |
5LZ172.5×7.0V | 215-244 | 81/eight-95/8 | 20-35 | four. | a hundred and fifteen-one hundred eighty | 6452 | 11299 | 86.four-151.2 | 100 | two hundred | forty one/2REG | forty one/2REG | 8031 |
7LZ172.5×7.0V | 215-244 | 81/8-ninety five/eight | twenty-35 | 4. | seventy five-one hundred eighty | 6527 | 11420 | fifty nine.five-108.six | eighty | 160 | forty one/2REG | 41/2REG | 8631 |
5LZ185×7. | 215-244 | 81/8-95/eight | twenty-35 | four. | 184 | 5436 | 8154 | eighty-140 | a hundred and twenty | 240 | forty one/2REG | 61/2REG | 8120 |
5LZ185.5×7. | 215-244 | eighty one/8-95/eight | twenty-35 | 4. | 173 | 5939 | 8908 | 80-140 | one hundred twenty | 240 | forty one/2REG | sixty one/2REG | 8120 |
5LZ197×7. | 244-311 | ninety one/eight-125/8 | 20-forty | three.two | sixty one-122 | 14118 | 14118 | 57.6-115.two | a hundred and twenty | 240 | fifty one/2REG | sixty five/8REG | 7998 |
5LZ197.5×7. | 244-311 | ninety five/8-121/four | twenty-forty | four. | eighty five-one hundred sixty | 12640 | 12640 | seventy two-144 | one hundred thirty | 260 | 51/2REG | 65/8REG | 8598 |
7LZ203×7. | 244-311 | ninety five/8-121/4 | 20-forty | 3.2 | 70-155 | 12289 | 12289 | 57.six-126.seven | 150 | 240 | fifty one/2REG | sixty five/8REG | 7798 |
5LZ203.5×7. | 244-311 | 95/eight-121/four | twenty-forty | four. | 70-a hundred and fifty five | 8778 | 15362 | 72-158.4 | a hundred and seventy | 260 | 51/2REG | sixty five/8REG | 8598 |
5LZ216×7. | 273-323 | 103/4-123/4 | 22-forty eight | 3.2 | 61-138 | 8895 | 15567 | sixty three.36-138.29 | 190 | 300 | sixty five/8REG | sixty five/8REG | 7756 |
5LZ216.5×7. | 273-323 | 103/4-123/four | 22-forty eight | four. | 61-138 | 11117 | 19455 | seventy nine.two-172.8 | 238 | 378 | sixty five/8REG | sixty five/8REG | 8546 |
5LZ244×7. | 311-445 | 121/2-171/2 | fifty-75 | 3.2 | ninety one-136 | 15124 | 26468 | a hundred and forty four-216 | 200 | 360 | 65/8REG | seventy five/8REG | 8635 |
7LZ244.5×7. | 311-445 | 121/two-171/2 | fifty-seventy five | four. | 91-136 | 18905 | 33085 | 180-270 | 250 | 450 | 65/8REG | 75/8REG | 9235 |
Downhole motor
Down-gap motor is a positive-displacement motor. It converts substantial fluid power into mechanical strength of bit rotation. Down-gap motor is broadly employed for drilling, deflecting, azimuth management, coring, reaming, side monitoring drilling and workover for horizontal effectively, cluster wells and straight nicely of oilfields and coal mines. In addition, it is suitable for complicated drilling
Glorytek gives various dimensions of down-gap motors for gap sizes from 1 7/eight” to 26″. Well-liked dimensions are 1 11/sixteen”, 2 7/8″, 3 1/eight”, 3 1/2″, 3 3/four”, 4″, 4 3/four”, five”, 5 5/16″,5 7/eight”, 6 1/four”, 6 1/2″, 6 3/four”, 7 1/four”, 7 3/4″, 8″,8 one/four”, 8 1/2″, 9″, 9 5/8″ and 11 one/4″.
Glorytek is capable to offer down-hole motors of specific dimensions, higher-velocity, medium-speed and lower-velocity, in accordance to customer’s requirements
Downhole Motor Doing work Basic principle
Downhole motor is a kind of downhole dynamic drilling instrument upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-move valve into the motor. This stream generates force loss at equally inlet and outlet of the pump, to drive the rotor into rotating, and to transmit the torque and pace on to the little bit. The downhole motor residence mostly is dependent on its residence parameters.
Constitution of Downhole Motor
Downhole motor is composed of 5 assemblies of bearing, electrical power section, coupling, anti-fall and bypass valve.
Features
Features of Large Flow Charge Down-gap Motor | Attributes of Uniform Wall Thickness Down- hole Motor |
The adoption of hollow rotor cooperating with difficult alloy jet nozzle of distinct sizes increases input stream price and proppant carrying ability. | This down-gap motor can properly solve the issue of uneven thickness of motor’s rubber. Its traits are as follows: higher stress enduring for one quality, huge output electrical power, vast range of substantial effectiveness, and many others. |
Functions of Bent Angle Adjustable Down-gap Motor | Attributes of Around Little bit Down-hole Motor |
The bend angle of down-gap motor can be adjusted on wellhead. Stabilizers of distinct shapes and measurements can be modified in accordance to various specifications. | Measure level of measuring instrument is installed in downhole motor, which is nearer to drilling bit. Drill monitor is more correct and reputable. |
Attributes of Regular Down-gap Motor | Features of Saturated Saltwater Mud Resistant Down-hole Motor |
Normal electrical power area the transmission shaft is lubricated by drilling fluid accessible in vertical, one-bend and double-bend sorts optimum working temperature is 120°C. | The special coating layer of rotor has more robust capability of corrosion and use resistance, enabling down-hole motors to operate a long time in saturated saltwater mud. |
Features of Oil-sealed Transmission Shaft Down-hole Motor | Functions of Substantial Temperature Resistant Down-hole Motor |
The functioning atmosphere of thrust bearing and radial bearing is improved, and the operating time of down-gap motor in the course of 1 one journey is improved. | The stator is geared up with excellent high quality higher temperature resistant rubber, which allows down-gap motor to execute stably for a long time beneath the gap in which temperature even reaches 150°C and180°C. |
Characteristics of Extended Down-hole Motor | Functions of High Deflection Down-hole Motor |
The torque is improved by 30% to sixty% in comparison with CZPT down-hole motors the transmission shaft is lubricated by drilling fluid accessible in vertical, single- bend and double-bend kinds greatest doing work temperature: 120°C. | The special construction helps make the motor shorter, the bending position nearer to drill little bit, and higher develop-up fee. |
Related CZPT
>> Packing and Transportation
Packing: Common packing.
Shipping and delivery: Normally twenty times soon after your payment.
>> Organization Profile
Glorytek CZPT (ZheJiang )Co.,Ltd.,
located in ZheJiang , China, is an integrated company specialised in production and exporting leading top quality drilling equipment and drilling components for a long time. We are supported and assisted by a highly experienced crew of designers and engineers that enable us to complete all the assigned tasks successfully as per the specified necessity from our clientele.
Our items are commonly utilized in the scope of mining, drinking water nicely drilling and exploration, anchor grouting venture, facet slope security engineering, oil and fuel engineering,underwater rock drilling & blasting operations of seaport channel, hydropower venture, nationwide protection projects ect.
>> Certifications
>> Latest Exhibition
>> Buyer Images
>> After-sale Warranty
(1) Cost-free adjust after the issue brought on by the quality situation.
(2) Timely following-sale support shall be offered all the time.
>> FAQ
Q: Are you CZPT company or investing business?
A: We are an built-in corporation specialized in manufacturing and exporting.
Q: Can you supply associated drilling equipment?
A: Of course, we can provide full established of drilling instruments, this sort of as drill pipe, tricone little bit, PDC little bit, drag little bit, DTH Hammer. Moreover, we
have drilling equipments like rigs, mud pump, CZPT, and so on. as well.
Q: Which payment terms can you acknowledge?
A: Normally we desire 30% advance payment soon after obtain buy by T/T, 70% remaining payment before transport by T/T. And one hundred% advance payment after acquire order by T/T for tiny orders.
Q: How is your supply time?
A: This will depend on your buying quantity. Normally it will be all around twenty days right after we acquire your payment.
Q: How can you ensure the good quality?
A: We have our professional QC team and all the goods will be strict inspection and tests for each get ahead of shipping and delivery out.
>> Make contact with Us
Jane Cheng
Revenue Representative
Glorytek CZPT ( ZheJiang ) Co., Ltd.
Handle:No.B-2507, Xihu (West Lake) Dis.WeiCheng, GuanZhuang,Chao Yang District, ZheJiang , China.
Tel: -10-52864265/52864786
Fax: -10-5257170
Cellular:-13426425710
Site: