This equipment is DWIN company’s vacuum table machine. It working size is: 1300x2500x200mm, vacuum table, utilizing the vacuum pump to take up the substance on the table, it is handy for our consumers, you do not need to have the materials holders, set them on the desk , open the vacuum pump , then can working , but it has one particular point that not absorb the irregular , out of faltness material , 3D embossment. This vacuum table device in shape for the customers who has the big quantity productions, it can increase the functioning performance, it is conserve the time and labor than the aluminium profile wooden cnc router.
CZPT parameter:
| specs: | Design | DW1325 cnc wooden router |
| 1 | X,Y,Z Working Area | 1300x2500x200mm |
| two | Table Measurement | 1380×3040mm |
| three | X,Y,Z Traveling Positioning Precision | ±0.05/300mm |
| 4 | X,Y,Z Repositioning Positioning Precision | ±0.05mm |
| five | Table Area | Bakelite Vacuum Ttable (Choice:T-slot table) |
| six | Frame | Welded strucutre |
| seven | X, Y Construction | Rack and Pinion CZPT,Hiwin Rail Linear Bearings |
| 8 | Z Construction | Ball CZPT, Hiwin Rail Linear Bearings |
| nine | Max.Energy Use (With no spindle) | 3.0Kw |
| ten | Max.Rapid Vacation Rate | 50000mm/min |
| 11 | Max.Working Velocity | 25000mm/min |
| twelve | Spindle Power Motor | 3kw or 4.5kw water cooling or HSD for decision |
| 13 | Spindle Speed | -24000RPM |
| 14 | CZPT CZPT | Stepper program(Alternative:Servo System) |
| 15 | Functioning Voltage | AC220V/fifty/60Hz,1PH (Choice: 380V 3PH) |
| 16 | Command Language | G Code |
| 17 | Operating Program | DSP System (Choice: Mach3 Computer Software program) |
| eighteen | Interface | USB |
| 19 | Flash Memory | 128M(U Disk) |
| 20 | Collet | ER25 |
| 21 | X,Y Resolution | <0.02mm |
| 22 | Software program Compatability | Type3 computer software,Ucancam application(Choice:Artcam computer software) |
| 23 | working temperature | 0ºC~45ºC |
Samples
CZPT parts particulars:
Consumers