Introduction:
one. HS series slurry pump is created for the constant pumping of higher abrasive, high density slurries with minimal upkeep requirements. The donning parts are created of extremely chrome or and rubber. It will preserve higher effectiveness more than the put on life of its components.
2. The metal soaked parts and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and function higher performance efficiency capable of flow costs from ten.8 to 5400 m³/h and heads up to a hundred twenty five meters for large head designs.
Characteristics:
one. Cylindrical structure of bearing assembly: hassle-free to change the place among impeller and front liner
and can beremoved totally
2. Interchangeable anti-abrasive damp elements created of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher running force abilities
and an extra measure of safety.
4. The discharge branch can be oriented to any 8 positions at the interval of 45 levels
five. Different travel kinds: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR control, etc
6. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Normal Software:
| • CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
| • Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Design | Max Electrical power (Kw) |
Inlet & Outlet dimensions (inch) | Materials for Put on Parts | Stream Charge (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.five/1 | M | twelve.6~28.8 | 3.5~eight | six~68 | 1200~3800 | 152 |
| R | ten.8~twenty five.2 | three~seven | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/1.5 | M | 32.4~72 | 9~twenty | six~58 | 1200~3200 | 184 |
| R | 25.two~fifty four | 7~fifteen | 5.five~41 | 1000~2600 | 178 | |||
| 50HS-C | thirty | three/two | M | 39.six~86.four | eleven~24 | 12~64 | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/3 | M | 86.four~198 | 24~fifty five | nine~fifty two | one thousand~2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~a hundred | 12~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | 100~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | seven~49 | 400~one thousand | 510 | |||
| 200MS-E | a hundred and twenty | ten/eight | M | 666~1440 | 185~four hundred | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | 170~380 | eleven~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | 7~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~63 | 300~600 | 965 |
| R | 1152~2520 | 320~700 | 13~forty four | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven-hundred~1500 | 13~57 | 200~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | sixteen.2~34.two | 4.five~9.5 | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | sixty eight.four~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/4 | M | 324~720 | ninety~two hundred | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | one hundred thirty~280 | 20~ninety four | five hundred~1000 | 711 |
For the materials of wearing components,
“M” = metallic, ultra chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to make contact with us any time for information.
Your inquiry will get our prompt interest and response !